SS Site Visit 2018-07-21

• brought out Ameriflux team
• Fixed CNR4 top thermistor which I think the connector was cross threaded a bit and as tight as it would go but not actually engaged. Or previously engaged and loosened shortly after the reinstallation.
• brought out replacement computer for met data but thinking I won't install until after the experiment is over and power needs are less... or I'll see once everything is all set and then maybe add.
• Extension cord for forest floor tower had fallen out of the wall a bit... plugged it back in.
• still doing a bit of boardwalk work

For to do next visit

• could use several power strips in shed to make sure circuits are more easily balanced.
• Should use those one hole deals plus drill and screws to take a bit of pressure off the extension cords plugged in but hanging outside shed.
• need to bring out red & black wire for the 12v power supplies for the two laptops.
• shift data logger power onto the 12v battery system
• buy more cross arm brackets for additional PAR sensors on top
• bring out new skin surface temperature sensors
• bring out charged dewalt battery for sawzall.
• circuits are a bit unbalanced at the moment
• check with Bob about billing.