GP

This is the first utility program given to us by the programmers at EE Internet. Turns out this program just does the html pages and not the graphs. To run it you'll need to install two extra python packages: Kid and Pytz. Instruction for that are on the python page. To run gp from the command line you give python the input script name and also the name/location of an initialization file:

$ python gp.py ADOT/dot.ini

This setup was modified by Bob after the materials we got from the EEI people. For this run I copied everything off the EEI page and put it all into the directory

/work/python/gws/gp

Important directories you'll need full and be filling:
This is where the gp.py created html will go. On your first run directories will be created for each station.

/work/python/gws/gp/ADOT/html  

This is where all of the source data files from loggernet are contained. There is no directory structure here, everything is lumped into one directory.

/work/python/gws/gp/ADOT/data

It appears this directory, although listed in the configuration file, is not currently used by gp.py.

/work/python/gws/gp/ADOT/plots 

In addition, for the first run there is some code at the end of gp.py that tries to send an email. I commented that section out (lines 314 to 358 in revision 143 of gp.py).

Here's a working initialization file.

[Main]
networkName = ADOT
# Where the configuration files lie
configDir = /work/python/gws/gp/ADOT
# File with all the station information
stationInfoCsv = StationInfo.csv
# Directory containing the template files
templateDir = /work/python/gws/gp/ADOT
# The base dir for rendered files
outputDirBase = /work/python/gws/gp/ADOT/html
# Base URL of the data files (http://, ftp://, file:///home/data, etc)
#dataFileBaseURL = http://werc.engr.uaf.edu/~ken/nslope-adot/
# dataFileBaseURL = http://www.gwscientific.com/remote/adot/
dataFileBaseURL = file:///work/python/gws/gp/ADOT/data/
# Name of the diagnostics files
diagOutputName = adot-diag.html
# Are we generating the "stripped down" include files?
generateInclude = True
# Where are the graphs going?
graphOutputDirBase = /work/python/gws/gp/ADOT/plots
diagURL = http://www.eeinternet.com/dot/html/adot-diag.html
baseStationOrder = bullen,foothills

[DataRecency]
threshold = 0.25
notifyEmail = fnkci@uaf.edu,jkugler@eeinternet.com

[bullen]
baseStationName = Bullen Point Project
stationOrder = DBM1,DBM2,DBM3,DBM4,DBM5,DBM6,DBM7,DBM8,DBR1,DBR2,DBR3,DBR4,DBR5

[foothills]
baseStationName = Kuparuk Foothills Project
stationOrder = DFM1,DFM2,DFM3,DFM4,DFM5,DFR1,DFR2,DFR3

A bit more on this gp business. It appears to contain main() for this utility but the bulk of the work is done in gputil.py which contains object definitions for the system. Everything is pretty much done through the objects. The sneaky catch is that there's a filename hardcoded into the object, StationInfo.csv. StationInfo.csv basically constains the metadata for all these sites in csv format. Cracks me up a bit since they're also using the kid module which I thought was for flexible XML use but whatever I guess. So, you can get the feeling from reading the ADOT StationInfo.csv file below that all of this info gets used in various ways in the junk outputted to the html pages. Kind of a clumsy way of doing things but, there it is:

StationName,PakbusID,StationDescriptiveName,StationLocationDescription,Latitude,Longitude,MagneticDeclination(East),ElevationFt,ElevationM,DataFileDirectory,DataFileNameBase,DataFileSuffixes,OutputDir,TemplateMap
DBM1,201,Accomplishment Creek Met,"Accomplishment Ck, below lake at pass to Rubicon",N 68 24.696,W 148 8.190,22.6,4833,1474.065,,DBM1_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM1,dot
DBM2,202,Ribdon Met,Upper Rubicon,N 68 38.548,W 147 21.107,23.1,4648,1417.64,,DBM2_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM2,dot
DBM3,203,Juniper Met,Upper Juniper Ck,N 69 4.570,W 146 30.294,23.8,4324,1318.82,,DBM3_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM3,dot
DBM4,204,Sag-Ivishak Met,"Close to snow survey site UP1, aka FT1",N 69 12.933,W 148 33.116,22.9,1414,431.27,,DBM4_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM4,dot
DBM5,205,Upper Kad Met,Kadleroshilik uplands,N 69 32.968,W 147 56.505,23.5,686,209.23,,DBM5_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM5,dot
DBM6,206,Kavik Met,Kavik camp,N 69 40.402,W 146 54.034,24.1,649,197.945,,DBM6_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM6,dot
DBM7,207,Lower Kad Met,"Kadleroshilik River, near the old runway",N 70 4.406,W 147 39.000,23.8,78,23.79,,DBM7_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM7,dot
DBM8,208,Bullen Met,South of Bullen Pt,N 70 4.792,W 146 49.166,24.3,86,26.23,,DBM8_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM8,dot
DBR1,211,TBD,TBD,,,,,,,DBR1_,"",DBR1,dot
DBR2,212,Ribdon Rep,Somewhere around Lupine valley?,N 68 36.337,W 147 23.716,23.2,N/A,N/A,,DBR2_,"HrlyAtms.dat,HrlyDiag.dat",DBR2,dot
DBR3,213,Pogopuk Rep,Between Gilead Ck and Niviak Pass,N 69 17.369,W 146 22.990,23.3,N/A,N/A,,DBR3_,"HrlyAtms.dat,HrlyDiag.dat",DBR3,dot
DBR4,214,Kavik Rep,"South of Kavik Camp, next to winter trail",N 69 37.893,W 146 52.889,23.4,1436,437.98,,DBR4_,"HrlyAtms.dat,HrlyDiag.dat",DBR4,dot
DBR5,215,Franklin Bluffs Rep,"Franklin Bluffs, NE side",N 69 48.633,W 148 19.540,23.1,875,266.875,,DBR5_,"HrlyAtms.dat,HrlyDiag.dat",DBR5,dot
DFM1,601,South White Hills Met,WERC HV5 snowsurvey site,N 69 12.043,W 149 33.508,22.4,962,293.41,,DFM1_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DFM1,dot
DFM2,602,White Hills Met,WERC White Hills previous repeater site,N 69 29.187,W 149 49.284,22.5,,,,DFM2_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DFM2,dot
DFM3,603,North White Hills Met,Between lake and stream to NNE of White Hills,N 69 42.892,W 149 28.227,22.6,276,84.18,,DFM3_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DFM3,dot
DFM4,604,North West Kuparuk Met,WERC H03 snowsurvey site,N 69 56.851,W 149 55.014,22.7,406,123.83,,DFM4_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DFM4,dot
DFM5,605,TBD,TBD,,,,,,,DFM5_,"",DFM5,dot
DFR1,611,Kak Rep,Kakukturat Mtn,N 69 4.357,W 149 30.870,22.3,1667,508.435,,DFR1_,"HrlyAtms.dat,HrlyDiag.dat",DFR1,dot
DFR2,612,Slope Mnt Rep,Slope Mtn Repeater Site (relocated to top),N 68 44.448,W 149 1.989,,3858,1176.69,,DFR2_,"HrlyAtms.dat,HrlyDiag.dat",DFR2,dot
DFR3,613,Shell Pingo Rep,Shell Pingo Top,N 70 1.234,W 147 40.903,23.8,408,124.44,,DFR3_,"HrlyAtms.dat,HrlyDiag.dat",DFR3,dot