Barrow Site D Inventory
Revision as of 15:02, 12 July 2013 by 137.229.92.213 (talk)
Sensor List (Plus the temperature probes still in Barrow)
- 1 pcs RM Young WS/WD 05103
- S/N 122565
- 2 pcs Vaisala HMP155A
- S/N J0330031
- S/N J0330017
- 1 pcs WS MetOne 014A
- S/N P11970
- 1pcs Kipp & Zonen CNR4 Net Radiometer
- S/N 120971
- SW Up 12.77
- SW Dn 14.09
- LW Up 8.27
- LW Dn 8.17
- S/N 120971
- 1pcs Campbell SR50A
- S/N 5085
- 6 pcs East30 Thermal Conductivity Sensors:
- S/N 1483
- S/N 1484
- S/N 1489
- S/N 1500
- S/N 1480
- S/N 1481
- 2 pcs GI Soil Temperature Triple Probe
- S/N TT1208
- S/N TT1205
- 1 pcs GI Shallow Borehole Temperature Profile
- S/N TS1204
- 6 pcs Stevens HydraProbe II Soil Moisture Probe
- ID1 S/N 194738
- ID2 S/N 194745
- ID3 S/N 194739
- ID4 S/N 207302
- ID5 S/N 207303
- ID6 S/N 207317
- 2 pcs Hukseflux HFP01 Heat Flux Plate
- S/N 7873
- 60.90 uV / (W/m^2)
- S/N 7906
- 62.59 uV / (W/m^2)
- S/N 7873
- 1 pcs 107 Probe (I might just drop this)
- 2 pcs Campbell CE4 4-Channel Current Excitation Module
- S/N 1493
- S/N 1494
- 1 pcs Campbell CR1000 data logger
- S/N 55393
- 3 pcs Campbell AM16/32B Multiplexer
- S/N 15112
- S/N 15113
- S/N 15208
- 1 pcs Campbell RF450 Radio
- s/n 9570216
Still Needed:
- Solar Panel
- Solar Panel Mounting aluminum / steel flat stock
- radiation shield for 107 air temperature
- vertical pipe, 3 inch diameter (well, there is one up there at the controls shed I think)
- 3 inch male terminal adapter?
- 4 cross arm brackets
- 1" x 1" nurail for WS/WD sensors at top of tower? Or.... neck the top pipe down to 1 inch and put the anemometer on that.
- Correct NuRail fittings for the snow stands
- Correct Pipe for snow stands (any dimensional changes to make?)
- 4 small antennas for RF450s
Tools:
- 3 inch hole saw
- 3/4 inch hole saw
- 5/16" nut driver