August 2014 Barrow
Revision as of 21:58, 20 August 2014 by 64.145.76.81 (talk)
To Do:
- Change out snow transducers, 8 pieces
- swap back the B site net radiometer
- change out desiccant in the D site radiometer
- level radiometers
- Fix C site Rim Snow Sensor
- D Thermal Conductivity
- Program works fine in Fairbanks
- OKAY... Look at how it is wired in the field. / in pictures. I think there are two pulse port instructions when there should be just one.
To Bring:
- CNR4 Net Radiometers
- One for B (the original)
- retap the D screws and if I can't get that to work then move the alternate radiometer from inventory (B) to D.
Plan:
Code: FDVIBG
Depart Thursday morning @ 7:40am
Return Friday night @ 12:21 AM
Thursday
- @ airport by 6ish
- grab coke in Fairbanks airport
- Arrive at NARL around 11am
- get keys and dress for day in field
- wind breaker
- backpack ready to go
- lunch for the day
- Water bottle, fill it
- actionpacker with:
- 8 snow sensors
- toolbag
- net radiometer for B
- drill for tapping D radiometer if needed
- 6/32 screw for D
- also bringing a 4/32 screw & tap for backup.
- serial cable
At each site
- level radiometer
- level precip bucket
- look at leveling tower / anemomemters
- listen to anemometers for bearing problems
- swap out desiccant in the box
- might double-check serial numbers if there is time
- more pictures
Additionally
- At B swap back in original radiometer
- At C fix the Rim snow sensor
- At D change out the desiccant in the radiometer