Spring 2016 site visit
Revision as of 16:28, 2 June 2016 by 137.229.92.185 (talk)
- take photos of sensors without pics on instrumentation site
- bring measuring cup set for leveling UVA and UVB sensors
- wire junction to split all instruments needing 12V from logger
- install new evap pan
- leak test (marine epoxy in case of leaks. should be up in the EDC office)
- clean out bottom
- swap in fancier wind sensor
- fill in serial numbers of all instruments/loggers on google sheet
- calibrate tipping bucket
- fill bottle to line, use smallest orifice, do this 3 times
- should be 30mm per bottle, so 90mm total
- change multiplier in program if necessary
- do accuracy test on Pluvio
- received software in ftp from ott (on my fancy laptop, need to transfer to toughbook)
- need usb cable
- swap out HMP155s
- write down which height is which SN
- swap out quantum sensors
- bring mini wrench to replace them
figure out what the connection is like at toolikchange calibration constant?
- download garden cam images
- bring replacement batteries
- we zero out the CMP6, but not the CNR4. reconsider?
- swap CNR4
- install new barometer
- change program calibration constants
- change UVA + UVB program calibration constants: UVA:0.0221, UVB: 0.00178 (per Lija's email)
- remove old radio
- get field books from Brie
- To change on instrumentation website
- pluvio is actually version 2
- lake temp measurement
- barometer
- to bring
- laptop + charger
- field laptop + charger
- tipping bucket calibration box
- gloves, hat(warm and sun)
- tools
- wire junction
- hiking boots,rubber boots
- field book
- usb cable for pluvio
- cookies for brie
- instruments
- anemometer
- CNR4
- Two HMP155s
