2016 Summer Nome Trip

First Trip To Do:

@ Teller
- Lily / Bill -- initialize & install surface water probes (Hobo)
  - Mark each with colored tape
  - set measurement interval to once per 15 minutes
  - will be co-located with LANL Isco Samplers (requiring coordination with Brent / Cathy )
- Bob Bolton -- measure discharge @ bridge
  - I was measuring on the upstream side of the bridge with the measuring tape strung from one side to the other.
  - note water level above screed stakes in channel:
    - furthest into the channel on the right bank side, upstream 1-1.5m is #1
    - If they are exposed (likely) then measure stage above PT as well as stage immediately up stream of the screed stake.
- Lily / Bill -- download data from:
  - Radiation site at top of drainage
  - snow temperature site at basin surface water gaging site (& you can turn off the system / disconnect the battery)
  - surface water station
@ Kougarok
- if time allows, download data over radio network from Quartz Creek Air field
  - Flag 1 leave radios on full time
  - K1, K2, K3 to retrieve from.

To bring back (trip 1):

To ship:

To Prep List:

PRs:

TA:

Contents