Teller Lower Station

From IARC 207 Wiki
Revision as of 14:25, 1 August 2016 by 137.229.92.230 (talk) (Created page with "Tape Color is '''BLUE''' To Bring: * Put the 3m tripod built from tripod kit here. * 015103 WS/WD ** Make up cable for it * CR200 for measuring Pressure Transducers * ''5 pcs...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Tape Color is BLUE

To Bring:

  • Put the 3m tripod built from tripod kit here.
  • 015103 WS/WD
    • Make up cable for it
  • CR200 for measuring Pressure Transducers
  • 5 pcs VITEL Hydraprobe II
    • Need to set IDs
  • 4 pcs East30 sensors thermal conductivity or specific heat
    • also interface board
    • also measure the heater resistance of each
  • Cable protection
  • cable ties & hose clamps for securing cabling to tripod


Already at site:

  • HMP155
    • thinking about bringing out a replacement temperature head though because the one in place has been on the fritz over the summer.
  • TE525MM