Dbm8

site TODO list

• record as-built wiring of soil sensors
• Flex conduit as needed

• TAKE SR50 cable to site, estimated 40-feet (but check design specs!)

site logs

14 June 2007, Ken I., Doug K.

• net radiometer replaced
  • s/n 052046
  • 14.6 uV/W-m^2
  • 120 cm centerline sensor to ground

• SR50 -- cable missing, not replaced (had one, but too short)

• RMYoung & HMP45C cables put in flex conduit on tripod

• no GWS-YSI sensor, and no conduit was left for it

• AT shields braced with mast/enclosure bracket to strengthen

• antenna cable wrapped with nylon spiral wrap; no way to pull into conduit

• conduits wired (using tie-wire) to enclosure entry fittings to secure

• soil temp profile cable: added strain relief using hose clamp & cord; load was on the multiplexer terminals

• added cord inside enclosure to secure extra/loose cables inside

• replaced rain gauge
  • model: TR-525USW
  • s/n: 37655-1205
  • collector/funnel secured with hose clamp
  • screen secured with electrical tape

13 June 2007, Ken I., Doug K.

• installed electric fence with 3 posts

• no time to fix site cables

• LOTS of fox scat around site, many chewed cables