JB March 2011 Shopping List 1

To purchase for station systems

• 4pcs Large Actionpacker
• 4pcs 16x6 clear container
• 2pcs 3/4" x 12" x 72" Wooden Panel
• 4pcs 2 x 12 x 8' Pressure Treated Lumber
• 16 pcs -- 12" Galvanized Spike
  • 12 for tripod legs
  • 4 for precip bucket
  • 4 for air temp mounting pole
• 12 pcs Plate Washer
  • Spike + Washer + unistrut angle bracket = tripod anchoring system.
• 1pcs Box of 1-5/8" Deck Screws
  • Securing Actionpacker to 2x12
  • Securing Corner Brace to 2x12
  • Securing Hinge to 2x12s
  • securing angle bracket to 2x12s
• 1pcs Box of 1" Deck Screws
  • Securing CSI instrumentation to 3/4"x12"
  • Solar Panel to Actionpacker?
• 8pcs 12" Corner Brace
  • These will screw onto the 2x12 to support the actionpacker
• 8pcs Heavy Strap Hinge
  • I'm thinking right now one per unistrut tripod leg.
• 12pcs 90 degree angle bracket for unistrut
  • One per tripod leg (2 unistrut legs, 1 wooden leg)
• 6pcs Half-slot 10' Unistrut
  • 2 - 5' Legs per tripod
  • 1 - 5' Crossarm per tripod (for AirTemp support)
• 16pcs 1/4-20x1.25" Bolts
  • 2 each unistrut leg to unistrut crossarm
  • 2 each unistrut leg to 90 degree angle bracket
• 16pcs 1/4" fender washer
  • 2 each unistrut leg to unistrut crossarm
  • 2 each unistrut leg to 90 degree angle bracket
• 16pcs 1/4" unistrut nuts
  • 2 each unistrut leg to unistrut crossarm
  • 2 each unistrut leg to 90 degree angle bracket
• 7pcs 1" x 10' Pipe
  • 2pcs 1" x 5' Pipe for the precip stand
  • 1pcs 1" x 30" Pipe for the precip stand
  • 1pcs 1" x 5' Pipe for the AirTemp pole
• 16pcs Smallish Hoseclamps
  • 3pcs Screed stake to 1" pipe (per site)
  • 1pcs AT pipe to spike (per site)
• 8pcs Medium Hoseclamps
  • 2pcs 1" AT pipe to unistrut crossarm (per site)