Toolik DOT 2011-05-19
Revision as of 07:30, 19 May 2011 by 137.229.91.138 (talk)
Contents
Coordinates
Itkillik Station -- Lat: 68 51.991, Lon: -150 2.400, Elev: 458 meters (1504 feet)
Northern Extent of Open Water -- Lat: N68 40,331, Lon: -149 50.279
PlantCam -- Lat: N68 54.757, Lon: -150 05.697
Hobo #2 -- Lat: N68 52 13.1", Lon: - 150 02 59.2"
Hobo #3 -- Lat: N68 52 44.72", Lon: -150 03 57.63"
Probable Peak Flow Gaging Location -- Lat: N68
Tasks
Bob from Camp
- Load helo up with gaging equipment for the culvert site.
- download data from R8
- Clear memory & send R8 back out with TSCe handheld
- also send out instructions for gps
Itkillik Station
- Measure bumper & bottom of R8 to GPS Master 2 again
- Retrieve GPS Unit for Bob
- Snow Survey
- Everything is on site
- Start Surveying
- Paint top of culvert
- Standard aerial pictures of gaging cross-section
- Identify Dye Locations (Start & Finish)
- Start @ Station
- Look for good downriver Locations
Itkillik River Crossing
- Pictures @ Bridge crossing
- Digital Camera
Peak Flow Gaging Site
- Settle on a location (Get a visual of it)
Hobo #3 Location
- Spare Hobo (@Toolik)
- Program in camp on 5/18
- Make a GPS Master 3 near the third hobo down river.
- hobo environmental protection (@snowmachine trailer)
- steel cable (in helicopter)
- cable clamps (with Bill)
- weight (in helicopter?)
- sledge hammer (in helicopter)
- screed stakes (in helicopter)
- 1 for hobo in river
- 1 for hobo anchor on the bank
- 1 for GPS Master 3
- Tools --
- 5/16" Nut Driver for hose clamps
- 1/4" wrench or leatherman for steel cable clamps
- shovel or two
- ice pick
- breaker bar
Tools
- Bob's toolbags (in helicopter)
- Shovels (in helicopter)
Bob in Toolik
- Update firmware on streampro
- Follow up on Ken's email about other station work
- Line out coordinates and a game plan for these sites
- Test out GPS scripts with StreamPro
- Start Daily Backups
- Move the rest of the gear to the station