Barrow Site D Inventory

Sensor List (Plus the temperature probes still in Barrow)

• 1 pcs RM Young WS/WD 05103
  • S/N 122565
• 2 pcs Vaisala HMP155A
  • S/N J0330031
  • S/N J0330017
• 1 pcs WS MetOne 014A
  • S/N P11970
• 1pcs Kipp & Zonen CNR4 Net Radiometer
  • S/N 120971
    • SW Up 12.77
    • SW Dn 14.09
    • LW Up 8.27
    • LW Dn 8.17
• 1pcs Campbell SR50A
  • S/N 5085
• 6 pcs East30 Thermal Conductivity Sensors:
  • S/N 1483
  • S/N 1484
  • S/N 1489
  • S/N 1500
  • S/N 1480
  • S/N 1481
• 2 pcs GI Soil Temperature Triple Probe
  • S/N TT1208
  • S/N TT1205
• 1 pcs GI Shallow Borehole Temperature Profile
  • S/N TS1204
• 6 pcs Stevens HydraProbe II Soil Moisture Probe
  • ID1 S/N 194738
  • ID2 S/N 194745
  • ID3 S/N 194739
  • ID4 S/N 207302
  • ID5 S/N 207303
  • ID6 S/N 207317
• 2 pcs Hukseflux HFP01 Heat Flux Plate
  • S/N 7873
    • 60.90 uV / (W/m^2)
  • S/N 7906
    • 62.59 uV / (W/m^2)
• 1 pcs 107 Probe (I might just drop this)
• 2 pcs Campbell CE4 4-Channel Current Excitation Module
  • S/N 1493
  • S/N 1494
• 1 pcs Campbell CR1000 data logger
  • S/N 55393
• 3 pcs Campbell AM16/32B Multiplexer
  • S/N 15112
  • S/N 15113
  • S/N 15208
• 1 pcs Campbell RF450 Radio
  • s/n 9570216

Still Needed:

• Solar Panel
• Solar Panel Mounting aluminum / steel flat stock
• radiation shield for 107 air temperature
• vertical pipe, 3 inch diameter (well, there is one up there at the controls shed I think)
• 3 inch male terminal adapter?
• 4 cross arm brackets
• 1" x 1" nurail for WS/WD sensors at top of tower? Or.... neck the top pipe down to 1 inch and put the anemometer on that.
• Correct NuRail fittings for the snow stands
• Correct Pipe for snow stands (any dimensional changes to make?)
• 4 small antennas for RF450s

Tools:

• 3 inch hole saw
• 3/4 inch hole saw
• 5/16" nut driver