Spring 2016 site visit
Revision as of 12:54, 2 June 2016 by 137.229.92.185 (talk)
- take photos of sensors without pics on instrumentation site
- bring measuring cup set for leveling UVA and UVB sensors
- wire junction to split all instruments needing 12V from logger
- install new evap pan
- bring marine epoxy in case there is a leak
- swap in fancier wind sensor
- fill in serial numbers of all instruments/loggers on google sheet
- calibrate tipping bucket
- fill bottle to line, use smallest orifice, do this 3 times
- should be 30mm per bottle, so 90mm total
- change multiplier in program if necessary
- do accuracy test on Pluvio
- received software in ftp from ott (on my fancy laptop, need to transfer to toughbook)
- need usb cable
- CANOE out to figure all of underwater sensors out!
- inspect pressure transducer and change desiccant
- figure out what is measuring temperature
- swap underwater quantum
- swap out HMP155s
- swap out quantum sensors
- bring mini wrench to replace them
- figure out what the connection is like at toolik
- change calibration constant?
- download garden cam images
- bring replacement batteries
- we zero out the CMP6, but not the CNR4. reconsider?
- swap CNR4
- change program calibration constants
- change UVA + UVB program calibration constants: UVA:0.0221, UVB: 0.00178 (per Lija's email)
- remove old radio
- get field books from Brie
- To change on instrumentation website
- pluvio is actually version 2
- lake temp measurement
- barometer
