Super Site Tower

To Purchase in town etc

• after leg supports are in place will need to pick up lag bolts for anchor base mounts

Tools needed Thursday

• wired Sawzall with long blade for cutting 8x8" lumber
• extra long sawzall blade
• tool belt, small
• 9/16" Wrench & nut driver / socket
• gorilla cart
• cordless drill for hangers

Bolting hardware

• Medium-Strength Grade 5 Zinc-Plated Steel Cap Screw, 3/8"-16 Thread, 4" Long
• Type 316 Stainless Steel Nylon-Insert Locknut, 3/8"-16 Thread Size
• Zinc Yellow-Chromate Plated Steel Flat Washer, Grade 9, 3/8" Screw Size

Extra Notes

• the cyberpower below the SS Toughbook may be at capacity. Or who knows. There was a power surge that tripped it, which brought the network down when the deal didn't come back up.
• something to keep an eye on. It coincided perhaps with an 8/21 visit.
• it is a recurring brown out but I'm not sure yet if it is hitting everything or just that UPS.
• probably need an extension to reconnect the HMP power.

Activity Log

• 8/29
  • re-routed all radiation sensors & temporary rewire
  • powered off AT/RH
  • the cnr4 heater/ventilators are off at the moment.... might be a good time to shorten up the cables to them, too...
• 9/1
  • re-routed at/rh
  • hauled out bulk of tower clamps & related hardware
• 9/18-9/28
  • tracking down pipe & vehicles
  • fleshing out the procedure