Teller Lower Station

Tape Color is BLUE

To Bring:

• Put the 3m tripod built from tripod kit here.
  • Needs 1.5" mast... cut pipe from April that was unused and add coupler
  • needs 1.5" to 1" coupler... purchase
  • needs 1" mast... purchase
  • Use 1.5" Net Radiation cross arm here.
  • Cut
• Battery box in basement needs holes cut for 1/2" liquid-tite (ship battery box filled with instruments
• Instrument box with 1 CR1000 and AM416 is on site
• Bring a second instrument box with 1 AM16/32 for met instruments.

Outstanding Tripod items

• Cross arm support brackets and such
• mount am16/32 to second instrument box
• send instruments & battery box on second freight run
• Stabilizer for net radiometer support arm.
  • used cross arm brackets last time... need to dig them out and make sure we have enough.
  • also could use ubolts and unistrut.

Sensors

To Bring:

• 015103 WS/WD
  • Make up cable for it
• CR200 for measuring Pressure Transducers
• 5 pcs VITEL Hydraprobe II
  • Need to set IDs
• 4 pcs East30 sensors thermal conductivity or specific heat
  • also interface board
  • also measure the heater resistance of each
• Cable protection
• cable ties & hose clamps for securing cabling to tripod

Already at site:

• HMP155
  • thinking about bringing out a replacement temperature head though because the one in place has been on the fritz over the summer.
• TE525MM
• CNR4 w/bracket

To Ship:

• Tripod