Teller Lower Station
Revision as of 22:37, 2 August 2016 by 66.230.110.177 (talk)
Tape Color is BLUE
To Bring:
- Put the 3m tripod built from tripod kit here. (The heaviest steel tripod, blue tape on it)
- Battery box in basement needs holes cut for 1/2" liquid-tite (ship battery box filled with instruments
- Instrument box with 1 CR1000 and AM416 is on site
- Bring a second instrument box with 1 AM16/32 for met instruments.
Outstanding Tripod items
- Cross arm support brackets and such
- mount am16/32 to second instrument box
- send instruments & battery box on second freight run
- Stabilizer for net radiometer support arm.
- used cross arm brackets last time... need to dig them out and make sure we have enough.
- also could use ubolts and unistrut.
Cross Arms
- Net Radiometer skin temperature
- need to track down unistrut & strut clamps for stabilization (or ubolts)
- small cross arm for air temperature
- RM Young should mount to top without issue.
- Precip stand is already out there
- Need to figure out where NDVI sensors point. & do we have all supplies for that...
Sensors
To Bring:
- 015103 WS/WD
- Make up cable for it
- CR200 for measuring Pressure Transducers
- 5 pcs VITEL Hydraprobe II
- Need to set IDs
- 4 pcs East30 sensors thermal conductivity or specific heat
- also interface board
- also measure the heater resistance of each
- Cable protection
- cable ties & hose clamps for securing cabling to tripod
Already at site:
- HMP155
- thinking about bringing out a replacement temperature head though because the one in place has been on the fritz over the summer.
- TE525MM
- CNR4 w/bracket
Extras
- need to yet sort out how Met AM16/32 will attach
- need to drill out second instrument box so that cables can enter.
- Need to permanentify the solar panel
- bring solar panel from Fairbanks and but need to make a mount for it yet.
- Measure East30 sensor resistance
- label all subsurface sensors
- Need to survey in all instruments with GPS
- Reuse batteries that are already out here, no new batteries needed.
- think about how to mount iridium here...
To Ship:
- Tripod
