Teller Lower Station

Tape Color is BLUE

Outstanding Items

• Make Discharge Measurement
  • Tools:
  • Cloth Tape
• Need to bring out
• 1" Al pipe for away from tripod snow stand... can skinny pipe be made to work?
  • Tools: 1/2" nut driver / wrench
• Declination is 11 degrees... correct this later using datapro function.
• XX use battery box tarp to flop soil pit lid onto.
  • tape measure
  • saw
  • tarp
  • shovel
• camera power
• XX terminal strips for SDI 12 devices.
• XX 1"x1ft stub for net radiation
• XX guy wires for snow stand
• mount camera
• fix program problems:
  • Resistance logging
  • soil temperature logging
  • check to see that east 30 sensors are good with the jumper wire in place

Cross Arms

• Net Radiometer skin temperature
  • need to track down unistrut & strut clamps for stabilization (or ubolts)
• small cross arm for air temperature
• RM Young should mount to top without issue.
• Precip stand is already out there
• Need to figure out where NDVI sensors point. & do we have all supplies for that...

Sensors

To Bring:

• 015103 WS/WD
  • Make up cable for it
• CR200 for measuring Pressure Transducers
• 5 pcs VITEL Hydraprobe II
• 4 pcs East30 sensors thermal conductivity or specific heat
  • also interface board
  • also measure the heater resistance of each
• Cable protection
• cable ties & hose clamps for securing cabling to tripod
• VATP 1504 - see email for thermistor calibration offsets

Sensor Heights

• Anemometer @ top of tripod / ~3 meters
• HMP155 @ 1.5m above ground surface
• Barometric Pressure - in instrument box
• Net Radiation -
• Snow Temperature profile -- ground surface in the shrubs
• Snow Depth 1 -- 2m on cross arm off station
• Snow Depth 2 -- in shrubs on a stand.

Already at site:

• HMP155
  • thinking about bringing out a replacement temperature head though because the one in place has been on the fritz over the summer.
• TE525MM
• CNR4 w/bracket
• Two Batteries
• Solar Panel
• Charge Controller

Extras

• think about how to mount iridium here...
• Bring covers from Fairbanks to cover unitstrut ends like tennis balls.