Dfm2

site TODO list

• record as-built wiring of soil sensors
• Flex conduit as needed

site logs

• bring 2 posts, post driver, wire insulators; install posts midway in long runs
• secure rain gauge funnel
• flex conduit for antenna, other cables
• bring turnbuckle for N guy

13 July 2007, Ken I.

• electric fence working; taped yellow tags near posts
• fence could use two more posts in middle of long runs
• tightened both wires on NE fence run
• rain gauge funnel not secured
• tripod looks good; guys are a little slack
• site could use flex conduit on tripod wires
• radiation pole is plumb; cables a bit slack
• need turnbuckle on N guy (now secured with nylon cord)
• snow depth sensor off plumb; fitting looks bent; straightened/bent it back, but not quite vertical

9 June 2007, Ken I., Dan R.

• old site dismantled for later removal:
  • battery box: about 220 pounds, including 3 batteries
  • tower/stand: about 100 pounds
  • solar panel REMOVED

• electric fence put up using 4 posts