LI-7200 Thermcouple Replacement
Revision as of 10:33, 21 May 2019 by 172.18.0.1 (talk) (Created page with "===Tools required in field for instrument removal=== * Large crescent wrench to remove 1 meter air intake rod * Flat head Campbell Screwdriver to remove chamber pressure line...")
Tools required in field for instrument removal
- Large crescent wrench to remove 1 meter air intake rod
- Flat head Campbell Screwdriver to remove chamber pressure line
- possibly pliers though crescent wrench has worked fine to remove line running to air pump
- a couple of different #2 phillips (long to get started and then short for turning) to remove the phillips at the base
Tools for LI-7200 Access
- 7/64" allen wrench to take apart chamber
