Tipping Bucket Leveling
Jump to navigation
Jump to search
Tools
- Torpedo Level
- 5/16" Nut Driver
- 3/8" Nut driver (sometimes)
Supplies
- Shouldn't need any
Procedure
- Remove the orifice top of the tipping bucket and set aside.
- Put the torpedo level on and point it along the axis of one of the leveling legs.
- use a nut driver to loosen the hoseclamp connected to this first leveling leg. Adjust leg up and down until torpedo bubble in this direction. Then, retighten the hose clamp.
- rotate torpedo 90 degrees and repeat for the second leg.
- put the orifice back on the sensor.