GP
This is the first utility program given to us by the programmers at EE Internet. Turns out this program just does the html pages and not the graphs. To run it you'll need to install two extra python packages: Kid and Pytz. Instruction for that are on the python page. To run gp from the command line you give python the input script name and also the name/location of an initialization file:
$ python gp.py ADOT/dot.ini
This setup was modified by Bob after the materials we got from the EEI people. For this run I copied everything off the EEI page and put it all into the directory
/work/python/gws/gp
Important directories you'll need full and be filling:
This is where the gp.py created html will go. On your first run directories will be created for each station.
/work/python/gws/gp/ADOT/html
This is where all of the source data files from loggernet are contained. There is no directory structure here, everything is lumped into one directory.
/work/python/gws/gp/ADOT/data
It appears this directory, although listed in the configuration file, is not currently used by gp.py.
/work/python/gws/gp/ADOT/plots
In addition, for the first run there is some code at the end of gp.py that tries to send an email. I commented that section out (lines 314 to 358 in revision 143 of gp.py).
Here's a working initialization file.
[Main] networkName = ADOT # Where the configuration files lie configDir = /work/python/gws/gp/ADOT # File with all the station information stationInfoCsv = StationInfo.csv # Directory containing the template files templateDir = /work/python/gws/gp/ADOT # The base dir for rendered files outputDirBase = /work/python/gws/gp/ADOT/html # Base URL of the data files (http://, ftp://, file:///home/data, etc) #dataFileBaseURL = http://werc.engr.uaf.edu/~ken/nslope-adot/ # dataFileBaseURL = http://www.gwscientific.com/remote/adot/ dataFileBaseURL = file:///work/python/gws/gp/ADOT/data/ # Name of the diagnostics files diagOutputName = adot-diag.html # Are we generating the "stripped down" include files? generateInclude = True # Where are the graphs going? graphOutputDirBase = /work/python/gws/gp/ADOT/plots diagURL = http://www.eeinternet.com/dot/html/adot-diag.html baseStationOrder = bullen,foothills [DataRecency] threshold = 0.25 notifyEmail = fnkci@uaf.edu,jkugler@eeinternet.com [bullen] baseStationName = Bullen Point Project stationOrder = DBM1,DBM2,DBM3,DBM4,DBM5,DBM6,DBM7,DBM8,DBR1,DBR2,DBR3,DBR4,DBR5 [foothills] baseStationName = Kuparuk Foothills Project stationOrder = DFM1,DFM2,DFM3,DFM4,DFM5,DFR1,DFR2,DFR3