Tipping Bucket Leveling

Tools

• Torpedo Level
• 5/16" Nut Driver
• 3/8" Nut driver (sometimes)

Supplies

• Shouldn't need any

Procedure

• Remove the orifice top of the tipping bucket and set aside.
• Put the torpedo level on and point it along the axis of one of the leveling legs.
• use a nut driver to loosen the hoseclamp connected to this first leveling leg. Adjust leg up and down until torpedo bubble in this direction. Then, retighten the hose clamp.
• rotate torpedo 90 degrees and repeat for the second leg.
• put the orifice back on the sensor.