Difference between revisions of "2016 June Nome Trip"
Jump to navigation
Jump to search
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
On the To Do list: | On the To Do list: | ||
* Anvil City School station needs a propeller for the 05103 | * Anvil City School station needs a propeller for the 05103 | ||
| + | ** we couldn't connect to the datalogger last trip | ||
* Switch the current SR50 to a SR50A and give Bill the old SR50. | * Switch the current SR50 to a SR50A and give Bill the old SR50. | ||
* | * | ||
| Line 6: | Line 7: | ||
* | * | ||
* K2 site download the storage module. | * K2 site download the storage module. | ||
| + | |||
| + | * Teller | ||
| + | ** Stream measurement | ||
| + | ** put up 3m tripod | ||
| + | ** move surface water sensors to their own logger | ||
| + | ** download and shutdown snow temperature logger | ||
| + | *** disassemble and bring back to town | ||
| + | ** download data from hill top | ||
| + | ** download data from gaging station | ||
| + | |||
| + | *C1-grid | ||
| + | ** RH is not matching well, check sensors | ||
| + | |||
| + | * Blueberry site | ||
| + | ** can we take down the tower, removing the lowest section?... might that be a three person job? | ||
| + | ** check out WS at 1m, its reading very low in comparison to 10m | ||
| + | |||
| + | * Kougarok 10m Met | ||
| + | ** snow sensor? | ||
| + | ** shorten tower? | ||
| + | ** I have in my notes that the tower is blistering so we should bring unistrut and ubolts for next trip | ||
| + | ** 1m WS and temp/RH are too low to the ground, raise them up | ||
| + | * check out battery data | ||
| + | |||
| + | *Kenji's site = bear creek | ||
| + | **hobo thermister wires broken but still reading resistances | ||
| + | **bring extension wires, pipe cutter, cr10x, conduit, hose clamps, instrument box from K1 | ||
| + | **figure out thermister equation | ||
Latest revision as of 13:21, 2 June 2016
On the To Do list:
- Anvil City School station needs a propeller for the 05103
- we couldn't connect to the datalogger last trip
- Switch the current SR50 to a SR50A and give Bill the old SR50.
- Anvil logger could be upgraded to pakbus like we did at Skookum
- K2 site download the storage module.
- Teller
- Stream measurement
- put up 3m tripod
- move surface water sensors to their own logger
- download and shutdown snow temperature logger
- disassemble and bring back to town
- download data from hill top
- download data from gaging station
- C1-grid
- RH is not matching well, check sensors
- Blueberry site
- can we take down the tower, removing the lowest section?... might that be a three person job?
- check out WS at 1m, its reading very low in comparison to 10m
- Kougarok 10m Met
- snow sensor?
- shorten tower?
- I have in my notes that the tower is blistering so we should bring unistrut and ubolts for next trip
- 1m WS and temp/RH are too low to the ground, raise them up
- check out battery data
- Kenji's site = bear creek
- hobo thermister wires broken but still reading resistances
- bring extension wires, pipe cutter, cr10x, conduit, hose clamps, instrument box from K1
- figure out thermister equation
