Difference between revisions of "NGEE To Do Next Visit"
Jump to navigation
Jump to search
Line 1: | Line 1: | ||
===Seward Peninsula=== | ===Seward Peninsula=== | ||
[[2018 NGEE Nome June Trip]] | [[2018 NGEE Nome June Trip]] | ||
− | |||
− | |||
− | |||
* SR50A transducer replacement (fall activity) | * SR50A transducer replacement (fall activity) | ||
+ | * bring out one step stool to level teller bottom radiometer. | ||
+ | * bring out tap, die, drill, drill bit, screw for teller bottom radiometer. | ||
+ | * also replace cnr4 desiccant since the unit didn't look like it was sealing right with this missing screw. | ||
* Bring out additional desiccant? | * Bring out additional desiccant? | ||
* Teller SW desiccant replacement | * Teller SW desiccant replacement | ||
− | |||
* Redrill hole for C1 Grid temperature probe | * Redrill hole for C1 Grid temperature probe | ||
− | |||
* Measure Creek Flow | * Measure Creek Flow | ||
* Re-level radiometers | * Re-level radiometers | ||
− | + | * Measure thermistors at Teller Bottom and add them to fieldbook. | |
− | * Measure thermistors at | ||
** Related: I'm wondering if the delay between measurements should be increased for the thermistor measurements. | ** Related: I'm wondering if the delay between measurements should be increased for the thermistor measurements. | ||
** Also related: perhaps add a second string up at teller top? | ** Also related: perhaps add a second string up at teller top? | ||
* 6/11/2018 In Fairbanks... down in 106 / the basement there is a box of 12" nails. Would be good to grab three for the Teller SW solar panel tripod | * 6/11/2018 In Fairbanks... down in 106 / the basement there is a box of 12" nails. Would be good to grab three for the Teller SW solar panel tripod | ||
* Koug M64 Ngee tipping bucket stand is 1" aluminum pipe (verified by photo) | * Koug M64 Ngee tipping bucket stand is 1" aluminum pipe (verified by photo) | ||
− | * Teller tipping bucket stands: 3/4" aluminum pipe (it appears) | + | * Teller Bottom tipping bucket stands: 3/4" aluminum pipe (it appears) |
====Teller SW Flow==== | ====Teller SW Flow==== | ||
* cloth tape | * cloth tape | ||
+ | ** left a small cloth tape at the site | ||
* metal meter stick or folding tape | * metal meter stick or folding tape | ||
+ | ** left a metal meter stick at the site | ||
* flow tracker | * flow tracker | ||
* fieldbook | * fieldbook |
Revision as of 22:32, 17 June 2018
Contents
Seward Peninsula
- SR50A transducer replacement (fall activity)
- bring out one step stool to level teller bottom radiometer.
- bring out tap, die, drill, drill bit, screw for teller bottom radiometer.
- also replace cnr4 desiccant since the unit didn't look like it was sealing right with this missing screw.
- Bring out additional desiccant?
- Teller SW desiccant replacement
- Redrill hole for C1 Grid temperature probe
- Measure Creek Flow
- Re-level radiometers
- Measure thermistors at Teller Bottom and add them to fieldbook.
- Related: I'm wondering if the delay between measurements should be increased for the thermistor measurements.
- Also related: perhaps add a second string up at teller top?
- 6/11/2018 In Fairbanks... down in 106 / the basement there is a box of 12" nails. Would be good to grab three for the Teller SW solar panel tripod
- Koug M64 Ngee tipping bucket stand is 1" aluminum pipe (verified by photo)
- Teller Bottom tipping bucket stands: 3/4" aluminum pipe (it appears)
Teller SW Flow
- cloth tape
- left a small cloth tape at the site
- metal meter stick or folding tape
- left a metal meter stick at the site
- flow tracker
- fieldbook
- YSI conductivity meter
- manual
- electrical tape
Radiation Level:
- step ladder
- a bit of wood to provide better base for step ladder
- phillips screwdriver for level
Radiation Desiccant Swap:
- Step ladder
- small CSI phillips
- K&Z desiccant pack
- anti-corrosion goo
Teller Top Soil Temperatures
- Volt meter
- fieldbook
Teller bottom precip bucket swap
- small csi phillips
- desiccant pack
- 2 red butt splices
- toggle bolts
- 5/16" nut driver
- 1/2" nut driver / wrench for ubolts
- crimping tool
- wire cutter
Utqiagvik
- Intensive Site C HMP155 failed
- Serial to USB Adapter seems to have shorted out recently:
[ 375.134145] usb 1-1.5: Manufacturer: Prolific Technology Inc. [ 375.137510] pl2303 1-1.5:1.0: pl2303 converter detected [ 375.152130] usb 1-1.5: pl2303 converter now attached to ttyUSB0 [ 375.585516] usb 1-1-port2: over-current change [ 375.801642] usb 1-1.5: USB disconnect, device number 48 [ 375.805558] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [ 375.805712] pl2303 1-1.5:1.0: device disconnected [ 376.041011] usb 1-1.5: new full-speed USB device number 49 using dwc_otg [ 376.144070] usb 1-1.5: New USB device found, idVendor=0557, idProduct=2008 [ 376.144111] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 376.144131] usb 1-1.5: Product: USB-Serial Controller [ 376.144149] usb 1-1.5: Manufacturer: Prolific Technology Inc. [ 376.160012] pl2303 1-1.5:1.0: pl2303 converter detected [ 376.167664] usb 1-1.5: pl2303 converter now attached to ttyUSB0 [ 377.377778] usb 1-1-port2: over-current change [ 377.591631] usb 1-1.5: USB disconnect, device number 49 [ 377.599560] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [ 377.599738] pl2303 1-1.5:1.0: device disconnected [ 377.840992] usb 1-1.5: new full-speed USB device number 50 using dwc_otg [ 377.943953] usb 1-1.5: New USB device found, idVendor=0557, idProduct=2008 [ 377.943995] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 377.944014] usb 1-1.5: Product: USB-Serial Controller [ 377.944031] usb 1-1.5: Manufacturer: Prolific Technology Inc. [ 377.947508] pl2303 1-1.5:1.0: pl2303 converter detected [ 377.961018] usb 1-1.5: pl2303 converter now attached to ttyUSB0