Difference between revisions of "June 2008 Field Trip - Emily and Ken"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
'''Note:''' Sites are grouped by area. | '''Note:''' Sites are grouped by area. | ||
| − | == Day 1 West of Dalton Highway == | + | == Day 1 West of Dalton Highway (White Hills)== |
1. [[dfm2| DFM2 White Hills met]] Bear Damage: | 1. [[dfm2| DFM2 White Hills met]] Bear Damage: | ||
| Line 15: | Line 15: | ||
* Measure distance from ground to snow sensor | * Measure distance from ground to snow sensor | ||
* No data in data files after May 30 | * No data in data files after May 30 | ||
| + | * Swap HMP45C | ||
2. [[dfm4| DFM4 NW Kuparuk Met]] DFM4: | 2. [[dfm4| DFM4 NW Kuparuk Met]] DFM4: | ||
* Measure distance from ground to snow sensor | * Measure distance from ground to snow sensor | ||
| + | * Swap HMP45C | ||
3. [[dfm3| DFM3 North White Hills Met]] | 3. [[dfm3| DFM3 North White Hills Met]] | ||
* Check precip data and check precip gage. Only 2 tips so far this summer. | * Check precip data and check precip gage. Only 2 tips so far this summer. | ||
| + | * Swap HMP45C | ||
| + | |||
| + | 4. [[dfm1| DFM1 South White Hills Met]] | ||
| + | * Swap HMP45C | ||
== Day 2 and 3 (Bullen Area) == | == Day 2 and 3 (Bullen Area) == | ||
Revision as of 11:42, 9 June 2008
All sites need HMP45C replacement and send back old for recalibration.
Ken add stations that need conduit and bear fencing.
Note: Sites are grouped by area.
Contents
Day 1 West of Dalton Highway (White Hills)
1. DFM2 White Hills met Bear Damage:
- Need anemometer cable,
- solar panel,
- soil profile (?),
- electric fencing checked,
- Measure distance from ground to snow sensor
- No data in data files after May 30
- Swap HMP45C
2. DFM4 NW Kuparuk Met DFM4:
- Measure distance from ground to snow sensor
- Swap HMP45C
- Check precip data and check precip gage. Only 2 tips so far this summer.
- Swap HMP45C
- Swap HMP45C
Day 2 and 3 (Bullen Area)
3. DBM7 Kadleroshilik Met DBM7 Snow Sensor:
- Needs SR50 replacement.
- Measure distance from ground to snow sensor.
4. DFR3 repeater Troubleshoot:
- Lost communications with site
- Needs HMP45C
5. DBR4 repeater Troubleshoot:
- Lost communications with site
6. DBM8 Bullen Met DBM8 (If Time)
- Replace GWS YSIx3 Air temp sensor
Day 4 (Kavik Area)
7. DBM5 Upper Kad Met DBM5:
- Check wiring of soil sensors, take photo.
- Measure distance from ground to snow sensor.
8. DBM6 Kavik Met:
- Check soil temperature wiring for any loose wires (temp sensors at 135 and 150 and 0 depth give funky readings),
- Measure distance from ground to snow sensor,
- reset antennae radio guy wires.
Day 5 (Mountain Sites)
9. DBM3 Juniper Met DBM3:
- North fence needs another post,
- solar panel wires are exposed, needs "plates" or other protection
