Difference between revisions of "June 2008 Field Trip - Emily and Ken"
Jump to navigation
Jump to search
| Line 30: | Line 30: | ||
== Day 2 and 3 (Bullen Area) == | == Day 2 and 3 (Bullen Area) == | ||
| − | + | 5. [[dbm7| DBM7 Kadleroshilik Met]] DBM7 Snow Sensor: | |
* Needs SR50 replacement. | * Needs SR50 replacement. | ||
* Measure distance from ground to snow sensor. | * Measure distance from ground to snow sensor. | ||
| + | * Swap HMP45C | ||
| − | + | 6. [[dfr3| DFR3 repeater]] Troubleshoot: | |
* Lost communications with site | * Lost communications with site | ||
* Needs HMP45C | * Needs HMP45C | ||
| + | * Swap HMP45C | ||
| − | + | 7. [[dbm8| DBM8 Bullen Met]] DBM8 (If Time) | |
| − | |||
| − | |||
| − | |||
* Replace GWS YSIx3 Air temp sensor | * Replace GWS YSIx3 Air temp sensor | ||
| + | * Swap HMP45C | ||
== Day 4 (Kavik Area) == | == Day 4 (Kavik Area) == | ||
| − | + | 8. [[dbr4| DBR4 repeater]] Troubleshoot: | |
| + | * Lost communications with site | ||
| + | * Swap HMP45C | ||
| + | |||
| + | 9. [[dbm5| DBM5 Upper Kad Met]] DBM5: | ||
* Check wiring of soil sensors, take photo. | * Check wiring of soil sensors, take photo. | ||
* Measure distance from ground to snow sensor. | * Measure distance from ground to snow sensor. | ||
| + | * Swap HMP45C | ||
| − | + | 10. [[dbm6| DBM6 Kavik Met]]: | |
* Check soil temperature wiring for any loose wires (temp sensors at 135 and 150 and 0 depth give funky readings), | * Check soil temperature wiring for any loose wires (temp sensors at 135 and 150 and 0 depth give funky readings), | ||
* Measure distance from ground to snow sensor, | * Measure distance from ground to snow sensor, | ||
* reset antennae radio guy wires. | * reset antennae radio guy wires. | ||
| + | * Swap HMP45C | ||
== Day 5 (Mountain Sites) == | == Day 5 (Mountain Sites) == | ||
| − | + | 11. [[dbm3| DBM3 Juniper Met]] DBM3: | |
* North fence needs another post, | * North fence needs another post, | ||
* solar panel wires are exposed, needs "plates" or other protection | * solar panel wires are exposed, needs "plates" or other protection | ||
| + | * Swap HMP45C | ||
| + | |||
| + | 12. [[dbm1| DBM1 Accomplishment Cr Met]] DBM1: | ||
| + | * Swap HMP45C | ||
| + | |||
| + | 13. [[dbm2| DBM2 Ribdon Cr Met]] DBM2: | ||
| + | * Swap HMP45C | ||
Revision as of 11:45, 9 June 2008
All sites need HMP45C replacement and send back old for recalibration.
Ken add stations that need conduit and bear fencing.
Note: Sites are grouped by area.
Contents
Day 1 West of Dalton Highway (White Hills)
1. DFM2 White Hills met Bear Damage:
- Need anemometer cable,
- solar panel,
- soil profile (?),
- electric fencing checked,
- Measure distance from ground to snow sensor
- No data in data files after May 30
- Swap HMP45C
2. DFM4 NW Kuparuk Met DFM4:
- Measure distance from ground to snow sensor
- Swap HMP45C
- Check precip data and check precip gage. Only 2 tips so far this summer.
- Swap HMP45C
- Swap HMP45C
Day 2 and 3 (Bullen Area)
5. DBM7 Kadleroshilik Met DBM7 Snow Sensor:
- Needs SR50 replacement.
- Measure distance from ground to snow sensor.
- Swap HMP45C
6. DFR3 repeater Troubleshoot:
- Lost communications with site
- Needs HMP45C
- Swap HMP45C
7. DBM8 Bullen Met DBM8 (If Time)
- Replace GWS YSIx3 Air temp sensor
- Swap HMP45C
Day 4 (Kavik Area)
8. DBR4 repeater Troubleshoot:
- Lost communications with site
- Swap HMP45C
9. DBM5 Upper Kad Met DBM5:
- Check wiring of soil sensors, take photo.
- Measure distance from ground to snow sensor.
- Swap HMP45C
10. DBM6 Kavik Met:
- Check soil temperature wiring for any loose wires (temp sensors at 135 and 150 and 0 depth give funky readings),
- Measure distance from ground to snow sensor,
- reset antennae radio guy wires.
- Swap HMP45C
Day 5 (Mountain Sites)
11. DBM3 Juniper Met DBM3:
- North fence needs another post,
- solar panel wires are exposed, needs "plates" or other protection
- Swap HMP45C
12. DBM1 Accomplishment Cr Met DBM1:
* Swap HMP45C
13. DBM2 Ribdon Cr Met DBM2:
* Swap HMP45C
