Difference between revisions of "June 2008 Field Trip - Emily and Ken"
Jump to navigation
Jump to search
(June 2008 trip Bullen/Foothills Emily Ken) |
|||
| Line 6: | Line 6: | ||
'''Note:''' Sites are grouped by area. | '''Note:''' Sites are grouped by area. | ||
| − | == Day 1 West of Dalton Highway (White Hills)== | + | == Day 1 and 2 West of Dalton Highway (White Hills)== |
1. [[dfm2| DFM2 White Hills met]] Bear Damage: | 1. [[dfm2| DFM2 White Hills met]] Bear Damage: | ||
* Need anemometer cable, | * Need anemometer cable, | ||
* solar panel, | * solar panel, | ||
| − | |||
* electric fencing checked, | * electric fencing checked, | ||
* Measure distance from ground to snow sensor | * Measure distance from ground to snow sensor | ||
* Swap HMP45C | * Swap HMP45C | ||
| + | * Install conduit | ||
2. [[dfm4| DFM4 NW Kuparuk Met]] DFM4: | 2. [[dfm4| DFM4 NW Kuparuk Met]] DFM4: | ||
| + | * Install conduit | ||
* Measure distance from ground to snow sensor | * Measure distance from ground to snow sensor | ||
* Swap HMP45C | * Swap HMP45C | ||
3. [[dfm3| DFM3 North White Hills Met]] | 3. [[dfm3| DFM3 North White Hills Met]] | ||
| − | * Check precip data and check precip gage. Only 2 tips so far this summer. | + | * Install Conduit |
| + | * Check precip data and check precip gage. Only 2 tips so far this summer. (bring spare precip gage) | ||
* Swap HMP45C | * Swap HMP45C | ||
4. [[dfm1| DFM1 South White Hills Met]] (if time) | 4. [[dfm1| DFM1 South White Hills Met]] (if time) | ||
| + | * Install conduit | ||
* Swap HMP45C | * Swap HMP45C | ||
| − | == Day | + | == Day 3 and 4 (Bullen Area) == |
5. [[dfr3| DFR3 repeater]] Troubleshoot: | 5. [[dfr3| DFR3 repeater]] Troubleshoot: | ||
| Line 35: | Line 38: | ||
6. [[dbm7| DBM7 Kadleroshilik Met]] DBM7 Snow Sensor: | 6. [[dbm7| DBM7 Kadleroshilik Met]] DBM7 Snow Sensor: | ||
| − | * Needs SR50 replacement. | + | * Needs SR50 replacement. |
| + | * Install conduit | ||
* Measure distance from ground to snow sensor. | * Measure distance from ground to snow sensor. | ||
* Swap HMP45C | * Swap HMP45C | ||
7. [[dbm8| DBM8 Bullen Met]] DBM8 (If Time) | 7. [[dbm8| DBM8 Bullen Met]] DBM8 (If Time) | ||
| + | * Wire soil moisture sensors that were damaged (bring spare cable) | ||
* Replace GWS YSIx3 Air temp sensor | * Replace GWS YSIx3 Air temp sensor | ||
* Swap HMP45C | * Swap HMP45C | ||
| − | == Day | + | == Day 5 (Kavik Area) == |
8. [[dbr4| DBR4 repeater]] Troubleshoot: | 8. [[dbr4| DBR4 repeater]] Troubleshoot: | ||
| Line 58: | Line 63: | ||
* Check soil temperature wiring for any loose wires (temp sensors at 135 and 150 and 0 depth give funky readings), | * Check soil temperature wiring for any loose wires (temp sensors at 135 and 150 and 0 depth give funky readings), | ||
* Measure distance from ground to snow sensor, | * Measure distance from ground to snow sensor, | ||
| + | * Install conduit | ||
* reset antennae radio guy wires. | * reset antennae radio guy wires. | ||
* Swap HMP45C | * Swap HMP45C | ||
| − | == Day | + | == Day 6 (Mountain Sites) == |
11. [[dbm3| DBM3 Juniper Met]] DBM3 | 11. [[dbm3| DBM3 Juniper Met]] DBM3 | ||
Revision as of 19:05, 9 June 2008
All sites need HMP45C replacement and send back old for recalibration.
Ken add stations that need conduit and bear fencing.
Note: Sites are grouped by area.
Contents
Day 1 and 2 West of Dalton Highway (White Hills)
1. DFM2 White Hills met Bear Damage:
- Need anemometer cable,
- solar panel,
- electric fencing checked,
- Measure distance from ground to snow sensor
- Swap HMP45C
- Install conduit
2. DFM4 NW Kuparuk Met DFM4:
- Install conduit
- Measure distance from ground to snow sensor
- Swap HMP45C
- Install Conduit
- Check precip data and check precip gage. Only 2 tips so far this summer. (bring spare precip gage)
- Swap HMP45C
4. DFM1 South White Hills Met (if time)
- Install conduit
- Swap HMP45C
Day 3 and 4 (Bullen Area)
5. DFR3 repeater Troubleshoot:
- Lost communications with site
- Needs HMP45C
- Swap HMP45C
6. DBM7 Kadleroshilik Met DBM7 Snow Sensor:
- Needs SR50 replacement.
- Install conduit
- Measure distance from ground to snow sensor.
- Swap HMP45C
7. DBM8 Bullen Met DBM8 (If Time)
- Wire soil moisture sensors that were damaged (bring spare cable)
- Replace GWS YSIx3 Air temp sensor
- Swap HMP45C
Day 5 (Kavik Area)
8. DBR4 repeater Troubleshoot:
- Lost communications with site
- Swap HMP45C
9. DBM5 Upper Kad Met DBM5:
- Check wiring of soil sensors, take photo.
- Measure distance from ground to snow sensor.
- Swap HMP45C
- change out YSIx3 if time
10. DBM6 Kavik Met:
- Check soil temperature wiring for any loose wires (temp sensors at 135 and 150 and 0 depth give funky readings),
- Measure distance from ground to snow sensor,
- Install conduit
- reset antennae radio guy wires.
- Swap HMP45C
Day 6 (Mountain Sites)
11. DBM3 Juniper Met DBM3
- North fence needs another post,
- solar panel wires are exposed, needs "plates" or other protection
- Swap HMP45C
12. DBM1 Accomplishment Cr Met DBM1 (if time)
- Swap HMP45C
13. DBM2 Ribdon Cr Met DBM2 (if time)
- Swap HMP45C
