Difference between revisions of "2016 June Nome Trip"

From IARC 207 Wiki
Jump to navigation Jump to search
imported>Bob
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
On the To Do list:
 
On the To Do list:
 
* Anvil City School station needs a propeller for the 05103
 
* Anvil City School station needs a propeller for the 05103
 +
** we couldn't connect to the datalogger last trip
 
* Switch the current SR50 to a SR50A and give Bill the old SR50.
 
* Switch the current SR50 to a SR50A and give Bill the old SR50.
 
*  
 
*  
 
* Anvil logger could be upgraded to pakbus like we did at Skookum
 
* Anvil logger could be upgraded to pakbus like we did at Skookum
 
*
 
*
 +
* K2 site download the storage module.
 +
 +
* Teller
 +
** Stream measurement
 +
** put up 3m tripod
 +
** move surface water sensors to their own logger
 +
** download and shutdown snow temperature logger
 +
*** disassemble and bring back to town
 +
** download data from hill top
 +
** download data from gaging station
 +
 +
*C1-grid
 +
** RH is not matching well, check sensors
 +
 +
* Blueberry site
 +
** can we take down the tower, removing the lowest section?... might that be a three person job?
 +
** check out WS at 1m, its reading very low in comparison to 10m
 +
 +
* Kougarok 10m Met
 +
** snow sensor?
 +
** shorten tower?
 +
** I have in my notes that the tower is blistering so we should bring unistrut and ubolts for next trip
 +
** 1m WS and temp/RH are too low to the ground, raise them up
 +
* check out battery data
 +
 +
*Kenji's site = bear creek
 +
**hobo thermister wires broken but still reading resistances
 +
**bring extension wires, pipe cutter, cr10x, conduit, hose clamps, instrument box from K1
 +
**figure out thermister equation

Latest revision as of 13:21, 2 June 2016

On the To Do list:

  • Anvil City School station needs a propeller for the 05103
    • we couldn't connect to the datalogger last trip
  • Switch the current SR50 to a SR50A and give Bill the old SR50.
  • Anvil logger could be upgraded to pakbus like we did at Skookum
  • K2 site download the storage module.
  • Teller
    • Stream measurement
    • put up 3m tripod
    • move surface water sensors to their own logger
    • download and shutdown snow temperature logger
      • disassemble and bring back to town
    • download data from hill top
    • download data from gaging station
  • C1-grid
    • RH is not matching well, check sensors
  • Blueberry site
    • can we take down the tower, removing the lowest section?... might that be a three person job?
    • check out WS at 1m, its reading very low in comparison to 10m
  • Kougarok 10m Met
    • snow sensor?
    • shorten tower?
    • I have in my notes that the tower is blistering so we should bring unistrut and ubolts for next trip
    • 1m WS and temp/RH are too low to the ground, raise them up
  • check out battery data
  • Kenji's site = bear creek
    • hobo thermister wires broken but still reading resistances
    • bring extension wires, pipe cutter, cr10x, conduit, hose clamps, instrument box from K1
    • figure out thermister equation