Difference between revisions of "2009 August Nome Trip"

From IARC 207 Wiki
Jump to navigation Jump to search
 
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
16 HMP45C heads needed for full replacement.  Not saying we need to do all of them but for the total out there number it is 16.
+
===Fairbanks Prep===
 +
 
 +
*16 HMP45C heads needed for full replacement.  Not saying we need to do all of them but for the total out there number it is 16.
 +
*Solder Quick Connects on Net Radiometers to be taken out to the SP.
 +
*Make sure we have enough SR50/SR50A/Judd sonic replacement sensors
 +
Broken Sensors:
 +
Kigluaiks AT/RH
 +
K3 1 & 3m AT/RH
 +
K1 1 & 3m AT/RH
 +
C2 10m AT/RH
 +
 
 +
To Do:
 +
* Program for new repeater
 +
* get right hardware for reinstalling Radiometers
 +
* bring solder?
 +
* bring quick connects (6) for net radiometers
 +
* Track down Taylor programming
 +
* make sure Taylor stuff will fit.
 +
* Change other programs to save less 5 minute stuff (make it a season based output).
 +
* Pack wading rod and Flo-Mate
 +
* Get programs onto new toughbook (and modify them).
 +
* Power Wire from Napa probably for Repeater site
 +
* 2 multiplexers
 +
* 2 CR10Xs
 +
* precision resistors
 +
* Longer Coax for at C2 Blueberry
 +
* Remaining Taylor stuff
 +
*
  
 
===Radio Repeater Station Needs:===
 
===Radio Repeater Station Needs:===
 +
Troubleshoot 2009 Radio Problems.  Specifically: Anvil to Kigluaiks Hop and Skookum to C2 Blueberry Hop.
 +
Repeater Site Logistics:
 +
* Tripod & Hardware (from pictures the bolts aren't in the tripod but they might be in the tripod legs)
 +
* Instrument Box (use the Kuzitrin one maybe?)
 +
* Battery Box (There's an extra from C3 in the Nome Storage)
 +
* Hole in battery box (To drain water)
 +
* batteries (Should be in Nome Storage)
 +
* battery cables (Need to make after buying wire in Fairbanks (NAPA)
 +
* power & data for radios (bring)
 +
* power cables and charge controller (Maybe out there, I'm not sure.  Solar panel had been at the Kuzitrin so presumably there's something attached)
 +
* power cable for solar panel (bring a C.C. for the large panel)
 +
* cable ties (grab some)
 +
* antenna (should be out there)
 +
* coax (should be out there?  Bring one out anyway)
 +
* radio (should be out there?  Bring one out anyway)
 +
* cr10x (Bring 2)
 +
* taylor anemometer (Bring the cross arms out)
 +
* set radio into correct modes (point to point slave / repeater)
 +
* Something for mounting the solar panel to the tower (Hmmm.. hose clamps maybe?)
 +
* copies of permits for posting
 +
 +
  
 
====Kigluaiks====
 
====Kigluaiks====
Line 9: Line 58:
 
  Anemometer Broke 07/2008
 
  Anemometer Broke 07/2008
 
  Install Taylor Anemometer
 
  Install Taylor Anemometer
 +
Add new tower/station
  
 
====Anvil Mountain====
 
====Anvil Mountain====
Line 32: Line 82:
 
  Install Snow temperature array for Saito?
 
  Install Snow temperature array for Saito?
 
  Solder on (@site) quick connects for Net Radiometer
 
  Solder on (@site) quick connects for Net Radiometer
 +
8/2009 comments
 +
Replace SR50A business end
  
 
====C2 Blueberry====
 
====C2 Blueberry====
Line 41: Line 93:
 
  Replace Precip Bucket
 
  Replace Precip Bucket
 
  Solder on (@site) quick connects for Net Radiometer
 
  Solder on (@site) quick connects for Net Radiometer
 +
8/2009 comments
 +
Replace 10m AT/RH
 +
Precip still wack
  
 
====K1 Burn====
 
====K1 Burn====
Line 49: Line 104:
 
   + bring out precision resistors
 
   + bring out precision resistors
 
  Solder on (@site) quick connects for Net Radiometer
 
  Solder on (@site) quick connects for Net Radiometer
 +
8/2009 comments:
 +
AT/RH is wack @ 1m & 3m
 +
Check Precip again.
 +
Bring out replacement logger and multiplexer
 +
Replace SR50A business end.
  
 
====K2 Met====
 
====K2 Met====
Line 57: Line 117:
 
  Solder on (@site) quick connects for Net Radiometer
 
  Solder on (@site) quick connects for Net Radiometer
 
  Install Snow Temperature array for Saito?
 
  Install Snow Temperature array for Saito?
 
+
8/2009 comments:
 +
Soil stuff looks funktastic
 +
Judd AT and distance look funky, too.
 
====K3 Mauze====
 
====K3 Mauze====
 
  HMP45C replace sensor with newly calibrated instrument @ 1m, 3m
 
  HMP45C replace sensor with newly calibrated instrument @ 1m, 3m
 
  Replace '''SR50''' Transducer
 
  Replace '''SR50''' Transducer
 
  Solder on (@site) quick connects for Net Radiometer
 
  Solder on (@site) quick connects for Net Radiometer
 +
8/2009 Comments:
 +
3m AT is wack
 +
Same for 1m & 3m RH
 +
Something happened to 3m WS & WD, too
 +
Replace SR50 business end
 +
 +
 +
SP Trip:
 +
Tuesday--
 +
* Arrive
 +
* Gage snake?  / visit snake?
 +
** Replace battery here
 +
** look at wiring to see how many sensors will fit on wiring panel
 +
* Touch base with Helo... meet it out at Golden gate pull out again
 +
(the real one)?
 +
* Prep for new repeater
 +
** Make sure station has all pieces
 +
*** Nuts & Bolts
 +
*** cable for batteries
 +
*** rebar or something like it?
 +
** logger with program
 +
**
 +
 +
* Food for Kougarok
 +
 +
Wednesday
 +
* Drive out to Golden Gate
 +
* Install new repeater
 +
* Also Visit Kig #1 and better secure antenna
 +
* Continue out to Kougarok...
 +
* stop by the Kuzitrin and score a few grayling for dinner?
 +
 +
Thursday
 +
* K1 Burn
 +
** Install Net Radiometer
 +
*** Bring quick connects & solder those, too
 +
** Trouble-shoot soil multiplexer goings on
 +
*** Bring out spare Mux
 +
*** Bring out spare CR10X
 +
*** Bring out precision resistors
 +
** replace SR50A business end
 +
** Replace 1m & 3m AT/RH (they're reading bad)
 +
** Look at precip bucket to see if we can get it to tip.
 +
** 1hour snow is funky (5min is fine)
 +
** Add code to logger so that 5 min measurements aren't made 5/1 to
 +
9/15 or something like that.
 +
 +
Friday
 +
* K2 Met
 +
** Replace Judd business end and make sure the new sensor works.
 +
Current readings are suggestive of a broken sensor.
 +
** install all the radiometers.  Bring out machines screws (from
 +
fairbanks) to secure radiometers to the tower.
 +
*** install quick connect for net radiation and install
 +
** install snow temperature pole
 +
** Look @ Soil Temperatures.
 +
** Add code to logger so that 5 min measurements aren't made 5/1 to
 +
9/15 or something like that.
 +
 +
Saturday
 +
* K3 Mauze
 +
** Replace SR50 business end.
 +
** Install Net Radiometer & Quick connect
 +
** 1m & 3m AT/RH Broken
 +
** 3m WS & WD broken, too
 +
 +
Sunday
 +
* Loose Ends in Kougarok
 +
 +
Monday
 +
* Drive back to Nome
 +
* Snake Loose Ends
 +
* Meet up with everyone
 +
* Anvil
 +
** Install Taylor Wind Set
 +
** Bring out CR10X to replace CR10 here at the moment
 +
 +
Tuesday
 +
* C1-Grid
 +
** Replace business end of SR50A
 +
** Install Net Radiometer & Quick connect
 +
 +
* C2 Blueberry
 +
** 10m AT/RH Broken
 +
** Summer Precipitation (no data), bring out a precip bucket from Nome.
 +
** Replace Business end of Judd
 +
** Look at radio link to Skookum (maybe check direction antenna is pointed / raise it?)
 +
 +
 +
Wednesday
 +
* Help Vladimir with his work and see the boreholes etc.
 +
 +
Thursday
 +
* Return to Nome
 +
* Return to Fairbanks

Latest revision as of 13:54, 27 July 2009

Fairbanks Prep

  • 16 HMP45C heads needed for full replacement. Not saying we need to do all of them but for the total out there number it is 16.
  • Solder Quick Connects on Net Radiometers to be taken out to the SP.
  • Make sure we have enough SR50/SR50A/Judd sonic replacement sensors

Broken Sensors:

Kigluaiks AT/RH
K3 1 & 3m AT/RH
K1 1 & 3m AT/RH
C2 10m AT/RH

To Do:

  • Program for new repeater
  • get right hardware for reinstalling Radiometers
  • bring solder?
  • bring quick connects (6) for net radiometers
  • Track down Taylor programming
  • make sure Taylor stuff will fit.
  • Change other programs to save less 5 minute stuff (make it a season based output).
  • Pack wading rod and Flo-Mate
  • Get programs onto new toughbook (and modify them).
  • Power Wire from Napa probably for Repeater site
  • 2 multiplexers
  • 2 CR10Xs
  • precision resistors
  • Longer Coax for at C2 Blueberry
  • Remaining Taylor stuff

Radio Repeater Station Needs:

Troubleshoot 2009 Radio Problems. Specifically: Anvil to Kigluaiks Hop and Skookum to C2 Blueberry Hop. Repeater Site Logistics:

  • Tripod & Hardware (from pictures the bolts aren't in the tripod but they might be in the tripod legs)
  • Instrument Box (use the Kuzitrin one maybe?)
  • Battery Box (There's an extra from C3 in the Nome Storage)
  • Hole in battery box (To drain water)
  • batteries (Should be in Nome Storage)
  • battery cables (Need to make after buying wire in Fairbanks (NAPA)
  • power & data for radios (bring)
  • power cables and charge controller (Maybe out there, I'm not sure. Solar panel had been at the Kuzitrin so presumably there's something attached)
  • power cable for solar panel (bring a C.C. for the large panel)
  • cable ties (grab some)
  • antenna (should be out there)
  • coax (should be out there? Bring one out anyway)
  • radio (should be out there? Bring one out anyway)
  • cr10x (Bring 2)
  • taylor anemometer (Bring the cross arms out)
  • set radio into correct modes (point to point slave / repeater)
  • Something for mounting the solar panel to the tower (Hmmm.. hose clamps maybe?)
  • copies of permits for posting


Kigluaiks

HMP45C requires replacement 
AT Broke 12/2007
RH Broke 05/2008
Anemometer Broke 07/2008
Install Taylor Anemometer
Add new tower/station

Anvil Mountain

HMP45C replace sensor with newly calibrated instrument
Install Taylor Anemometer
Summer Net radiation?

Skookum Pass

HMP45C replace sensor with newly calibrated instrument

Hydrologic Stations Needs:

Snake River

Replace Battery
Install surface and subsurface temperature sensors for ET calcs
Summer net radiation
wind speed for ET calcs

Meteorological Station Needs:

C1 Grid

HMP45C replace sensor with newly calibrated instrument @ 1m, 3m
Replace SR50A Transducer
Install Snow temperature array for Saito?
Solder on (@site) quick connects for Net Radiometer

8/2009 comments

Replace SR50A business end

C2 Blueberry

HMP45C replace sensor with newly calibrated instrument @ 1m, 3m, 10m
10m HMP45C Failed 12/2008
Replace Judd Transducer
Reinstall calibrated LW & SW Radiometers, bring machine screws from Fairbanks for fixing radiometers to stand.
Bring out soldering iron incase LW/SW cables have cracked over winter.
Replace Precip Bucket
Solder on (@site) quick connects for Net Radiometer

8/2009 comments

Replace 10m AT/RH
Precip still wack

K1 Burn

HMP45C replace sensor with newly calibrated instrument @ 1m, 3m
Replace SR50A Transducer
Fix Soil Temperature problem: 
  + bring out replacement AM416
  + bring out precision resistors
Solder on (@site) quick connects for Net Radiometer

8/2009 comments:

AT/RH is wack @ 1m & 3m
Check Precip again.
Bring out replacement logger and multiplexer
Replace SR50A business end.

K2 Met

HMP45C replace sensor with newly calibrated instrument @ 1m, 3m, 10m
Replace Judd Transducer
Reinstall calibrated LW & SW Radiometers
Bring out soldering iron incase LW/SW cables have cracked over winter.
Solder on (@site) quick connects for Net Radiometer
Install Snow Temperature array for Saito?

8/2009 comments:

Soil stuff looks funktastic
Judd AT and distance look funky, too.

K3 Mauze

HMP45C replace sensor with newly calibrated instrument @ 1m, 3m
Replace SR50 Transducer
Solder on (@site) quick connects for Net Radiometer

8/2009 Comments:

3m AT is wack
Same for 1m & 3m RH
Something happened to 3m WS & WD, too
Replace SR50 business end


SP Trip: Tuesday--

  • Arrive
  • Gage snake? / visit snake?
    • Replace battery here
    • look at wiring to see how many sensors will fit on wiring panel
  • Touch base with Helo... meet it out at Golden gate pull out again

(the real one)?

  • Prep for new repeater
    • Make sure station has all pieces
      • Nuts & Bolts
      • cable for batteries
      • rebar or something like it?
    • logger with program
  • Food for Kougarok

Wednesday

  • Drive out to Golden Gate
  • Install new repeater
  • Also Visit Kig #1 and better secure antenna
  • Continue out to Kougarok...
  • stop by the Kuzitrin and score a few grayling for dinner?

Thursday

  • K1 Burn
    • Install Net Radiometer
      • Bring quick connects & solder those, too
    • Trouble-shoot soil multiplexer goings on
      • Bring out spare Mux
      • Bring out spare CR10X
      • Bring out precision resistors
    • replace SR50A business end
    • Replace 1m & 3m AT/RH (they're reading bad)
    • Look at precip bucket to see if we can get it to tip.
    • 1hour snow is funky (5min is fine)
    • Add code to logger so that 5 min measurements aren't made 5/1 to

9/15 or something like that.

Friday

  • K2 Met
    • Replace Judd business end and make sure the new sensor works.

Current readings are suggestive of a broken sensor.

    • install all the radiometers. Bring out machines screws (from

fairbanks) to secure radiometers to the tower.

      • install quick connect for net radiation and install
    • install snow temperature pole
    • Look @ Soil Temperatures.
    • Add code to logger so that 5 min measurements aren't made 5/1 to

9/15 or something like that.

Saturday

  • K3 Mauze
    • Replace SR50 business end.
    • Install Net Radiometer & Quick connect
    • 1m & 3m AT/RH Broken
    • 3m WS & WD broken, too

Sunday

  • Loose Ends in Kougarok

Monday

  • Drive back to Nome
  • Snake Loose Ends
  • Meet up with everyone
  • Anvil
    • Install Taylor Wind Set
    • Bring out CR10X to replace CR10 here at the moment

Tuesday

  • C1-Grid
    • Replace business end of SR50A
    • Install Net Radiometer & Quick connect
  • C2 Blueberry
    • 10m AT/RH Broken
    • Summer Precipitation (no data), bring out a precip bucket from Nome.
    • Replace Business end of Judd
    • Look at radio link to Skookum (maybe check direction antenna is pointed / raise it?)


Wednesday

  • Help Vladimir with his work and see the boreholes etc.

Thursday

  • Return to Nome
  • Return to Fairbanks