NGEE To Do Next Visit

Seward Peninsula

2018 NGEE Nome June Trip

• Replace broken precip bucket @ Teller Bottom
• Replace broken precip bucket @ Koug m64
• Replace Desiccant deal for radiometers
• SR50A transducer replacement (fall activity)
• Bring out additional desiccant?
• Teller SW desiccant replacement
• Data Download
• Redrill hole for C1 Grid temperature probe
• Teller Bottom Program Send
• Measure Creek Flow
• Re-level radiometers
• Put out Divers for wells with Nathan
• Measure thermistors at Teller Top and Teller Bottom and add them to fieldbook.
  • Related: I'm wondering if the delay between measurements should be increased for the thermistor measurements.
  • Also related: perhaps add a second string up at teller top?
• 6/11/2018 In Fairbanks... down in 106 / the basement there is a box of 12" nails. Would be good to grab three for the Teller SW solar panel tripod
• Koug M64 Ngee tipping bucket stand is 1" aluminum pipe (verified by photo)
• Teller tipping bucket stands: 3/4" aluminum pipe (it appears)

Teller SW Flow

• cloth tape
• metal meter stick or folding tape
• flow tracker
• fieldbook
• YSI conductivity meter
  • manual
• electrical tape

Radiation Level:

• step ladder
• a bit of wood to provide better base for step ladder
• phillips screwdriver for level

Radiation Desiccant Swap:

• Step ladder
• small CSI phillips
• K&Z desiccant pack
• anti-corrosion goo

Teller Top Soil Temperatures

• Volt meter
• fieldbook

Teller bottom precip bucket swap

• small csi phillips
• desiccant pack
• 2 red butt splices
• toggle bolts
• 5/16" nut driver
• 1/2" nut driver / wrench for ubolts
• crimping tool
• wire cutter

Utqiagvik

• Intensive Site C HMP155 failed
• Serial to USB Adapter seems to have shorted out recently:

[  375.134145] usb 1-1.5: Manufacturer: Prolific Technology Inc.
[  375.137510] pl2303 1-1.5:1.0: pl2303 converter detected
[  375.152130] usb 1-1.5: pl2303 converter now attached to ttyUSB0
[  375.585516] usb 1-1-port2: over-current change
[  375.801642] usb 1-1.5: USB disconnect, device number 48
[  375.805558] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[  375.805712] pl2303 1-1.5:1.0: device disconnected
[  376.041011] usb 1-1.5: new full-speed USB device number 49 using dwc_otg
[  376.144070] usb 1-1.5: New USB device found, idVendor=0557, idProduct=2008
[  376.144111] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  376.144131] usb 1-1.5: Product: USB-Serial Controller
[  376.144149] usb 1-1.5: Manufacturer: Prolific Technology Inc.
[  376.160012] pl2303 1-1.5:1.0: pl2303 converter detected
[  376.167664] usb 1-1.5: pl2303 converter now attached to ttyUSB0
[  377.377778] usb 1-1-port2: over-current change
[  377.591631] usb 1-1.5: USB disconnect, device number 49
[  377.599560] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
[  377.599738] pl2303 1-1.5:1.0: device disconnected
[  377.840992] usb 1-1.5: new full-speed USB device number 50 using dwc_otg
[  377.943953] usb 1-1.5: New USB device found, idVendor=0557, idProduct=2008
[  377.943995] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  377.944014] usb 1-1.5: Product: USB-Serial Controller
[  377.944031] usb 1-1.5: Manufacturer: Prolific Technology Inc.
[  377.947508] pl2303 1-1.5:1.0: pl2303 converter detected
[  377.961018] usb 1-1.5: pl2303 converter now attached to ttyUSB0