NGEE To Do Next Visit
Contents
Seward Peninsula
- Replace broken precip bucket @ Teller Bottom
- Replace broken precip bucket @ Koug m64
- Replace Desiccant deal for radiometers
- SR50A transducer replacement (fall activity)
- Bring out additional desiccant?
- Teller SW desiccant replacement
- Data Download
- Redrill hole for C1 Grid temperature probe
- Teller Bottom Program Send
- Measure Creek Flow
- Re-level radiometers
- Put out Divers for wells with Nathan
- Measure thermistors at Teller Top and Teller Bottom and add them to fieldbook.
- Related: I'm wondering if the delay between measurements should be increased for the thermistor measurements.
- Also related: perhaps add a second string up at teller top?
- 6/11/2018 In Fairbanks... down in 106 / the basement there is a box of 12" nails. Would be good to grab three for the Teller SW solar panel tripod
- Koug M64 Ngee tipping bucket stand is 1" aluminum pipe (verified by photo)
- Teller tipping bucket stands: 3/4" aluminum pipe (it appears)
Radiation Level:
- step ladder
- a bit of wood to provide better base for step ladder
- phillips screwdriver for level
Radiation Desiccant Swap:
- Step ladder
- small CSI phillips
- K&Z desiccant pack
- anti-corrosion goo
Teller Top Soil Temperatures
- Volt meter
- fieldbook
Teller bottom precip bucket swap
- small csi phillips
- desiccant pack
- 2 red butt splices
- toggle bolts
- 5/16" nut driver
Utqiagvik
- Intensive Site C HMP155 failed