NGEE To Do Next Visit

SR50A transducer replacement (fall activity)
bring out one step stool to level teller bottom radiometer.
bring out tap, die, drill, drill bit, screw for teller bottom radiometer.
also replace cnr4 desiccant since the unit didn't look like it was sealing right with this missing screw.
Bring out additional desiccant? for box
Teller SW desiccant replacement
Redrill hole for C1 Grid temperature probe
Measure Creek Flow
Re-level radiometers
Measure thermistors at Teller Bottom and add them to fieldbook.
- Related: I'm wondering if the delay between measurements should be increased for the thermistor measurements.
- Also related: perhaps add a second string up at teller top?
- sort of some additional homework is that I saw instability in a number of thermistors when measuring up top. I suspect but haven't verified that this instability is an indicator for the wonky temperatures seen in the data but need to confirm.
6/11/2018 In Fairbanks... down in 106 / the basement there is a box of 12" nails. Would be good to grab three for the Teller SW solar panel tripod
Koug M64 Ngee tipping bucket stand is 1" aluminum pipe (verified by photo)
Teller Bottom tipping bucket stands: 3/4" aluminum pipe (it appears)
I should do some experiments with the thermal conductivity thermistors in office/lab to see if I can reduce the noisiness.

cloth tape
- left a small cloth tape at the site
metal meter stick or folding tape
- left a metal meter stick at the site
flow tracker
fieldbook
YSI conductivity meter
- manual
electrical tape
We (Nathan and I) set up a reach to use for salt slug method discharge estimates. It seemed to work great... though we haven't worked up the data...

Intensive Site C HMP155 failed
need to replace the network cable running from the computer to the network switch. It cuts out with minimal bumping.... but station is finally back online!!!
Site A SR50A transducers have failed
some subsurface items are beginning to fail.

Contents