NGEE Nome April 2016 pt 1
Revision as of 19:16, 29 March 2016 by imported>Bob (→Safety Gear)
NGEE Nome April 2016 pt 1 Bonus Notes
Contents
Activities
- Visit Teller Road site
- conduct snow surveys
- install snow depth & radiation monitoring stand
- snow melt cameras
- for daily site surveys: snow depth marker grid for helo photography
- Get gaging station installed
- Kougarok Road site
- conduct snow surveys
- install snow depth & radiation monitoring stand
- snow melt cameras
- for daily site surveys: snow depth marker grid for helo photography
Snow melt station description
- 4 component net radiation mounted at 1 to 1.5 meters above ground
- s/n 120966 (yellow) (Pakbus ID = 313)
- SW Up -- 13.83
- SW Dn -- 13.08
- LW Up --- 13.46
- LW Dn --- 14.06
- s/n 131352 (blue) (Pakbus ID = 314)
- SW Up -- 12.64
- SW Dn -- 12.69
- LW Up --- 13.27
- LW Dn --- 14.65
- s/n 120966 (yellow) (Pakbus ID = 313)
- snow temperature pole with temperatures every 4 cm (4 to 88 cm)
- soil surface temperature
- air temperature & relative humidity @ 2 meters
- snow depth
- snow melt camera
Safety Gear
- XX 3 person Tent (Busey has)
- knife
- 3x Sleeping Bags (BYO)
- Sleeping Pad (BYO)
- XX Full Medical kit (Busey)
- cook pot
- XX drinking water tablets
- helmets
- Uaf has backup helmets if Bering Air doesn't have any
- pocket saw
- matches
- food rations
- XX Snowshoes
- XX 1 pair of skis
To Ship
- Laser snow probe (or parts of it)
- batteries (x2) for stantds
- the radiation / snow monitoring stands
- one survey tripod
- snow temperature setup
- skis
- survival gear
Snow Sampling detail
- Small sled
- small actionpacker mountable on sled
- avalanche probe
- small shovel (2 total? one for sampling one for station work?)
- labeled ziploc bags
- small scale
- adirondack tube
- fieldbook
- camera
- pencil
- snow hardness probe
Snow Laser Tools required
- couple of allen wrenches
- 1/4" and 5/16" nut drivers
- multitool
Snow Laser System
- Survey tripod
- matching freewave radios
- base battery
- remote battery
- pelican case for brain
- second pelican case for brain (button-free)
- third pelican case for base station
- pig speaker
- regular speaker
- compass
- radio system
- Fiberglass yellow T probe
- Chimney rod
- chimney rod extension
- clear tray
- phone / table with geopdfs loaded
- bluetooth button
Hydro station setup
- tripod
- logger & box
- pressure transducers
- battery
- solar panel
- charge controller
- camera?
- snow depth sensor?
Station Setup
- Hardware
- Survey Tripod
- Horizontal arm in two pieces (electrical conduit cut in half)
- vertical pole in two pieces (might be possible to higher through trickery for the camera... need to mull.
- radiation shield for air temperature
- short cross arm for snow depth
- stabilizing rods for snow temperature profiles (3 or 4 plus plastic deals)
- net radiometer mounting bracket
- unit strut chunk for survey tripod mount
- maybe
- battery
- solar panel
- battery box
- power cabling for energy system
- instrument box
- solar panel charge controller
- data logger
- multiplexer
- precision resistors
- sutron iridium transceiver
- raspberry pi a+
- switched 12 volt deal
- cigarette adapter
- cigarette to 5V adapter
- iridium antenna for transceiver
- Sensors
- Air Temperature
- Net Radiometer
- snow depth
- snow temperature
- soil surface temperature
- game camera for observing snow melt
To Do Yet
Iridium system
- Sign up for service
- find 2x5 connector
- review developer guide to see about how to send a message
- have a good compression deal to get 280 characters to 90 so message is cheaper per unit.
Snow laser
- Write up on how to use
- stretch goal of route following
- XX look into programming the R8s for supplying RTK if the other units don't arrive.
Snow temps / depth / net radiation stand
- write data logger programs... draft written and running
- cobble package together for shipping
- XX white fiberglass rods
- XX the one hole deals to secure rods to the snow probe
Rest of snow gear
- track down scales
- zip loc bags
- folding tape
- t probe
To Do
- Calibrate Snow temperature probes
- test out RTK gps
- load maps and points on to phone & little computers
- get CSI deal running and automate the iridium stuff
- could just look at the Ken style read input locations thing
- write snowmelt station programs
- write gaging station program
- ship
- wire up instrument boxes
- make sure I have all equipment for instrument boxes
Packing List: Room 207 Ready to go
- Survey Tripod for GPS
- Survey Triopd for Snowmelt Station 1 (Teller Road probably)
- Snow sampling equipment
- Avalanche Probe (depth measurement)
- Andirondack Tube
- Compass
- Layer density scoops
- 3pcs
- 2x Solar panels
- 2x Net Radiometers
- 2x mounting brackets
- 1x cable (need to fix second this weekend)
- 2x charge controller
- 1x unistrut for radiometer stand
- 7x stabilizers for snow temperature deals
- 2x snowdepth sensor w/ mounting bracket & cable
- 13x markers for aerial snow measurements
Packing List Basement
- 3x 12V Battery
- 1x Battery box
Tools to Ship
- Cordless Drill
- 2x?
- 1lb hand maul?
- Pipe wrench?
Packing List Cathy
- snow hardness deal
- sleeping bag
- sleeping pad
- scale
- snow melt cameras for Kougarok & Teller
Packing List Bob Bolton
- Ziploc bags
- scale
- sleeping bag
- sleeping pad
- fieldbook
=Packing List Bob Busey
- 2x remote camera triggers
- Nikon Camera
- charger
- memory
- shovel
- tent
- sleeping pad
- sleeping bag
- first aid kit
To Shop for yet:
- one hole deals for snow poles
- snow poles9?)
- pipe for cross arms & couplers
- snacks
- anything else?
- more markers?
To Track down
- Find a second radiation shield for either HMP155 or HMP145C
Plan for week of 3/28
- 3/29 Ship Batteries to Nome (3x) on Northern Air Carog
- 3/30 Final word on permits
- 3/30 ship snow melt stations on Alaska Air Cargo
- 4/1 & 2 Depart for Nome