SS Site Visit 2017-12-15
Revision as of 13:56, 15 December 2017 by 137.229.18.212 (talk) (Created page with "* Replaced Tower LI7200 and updated calibration & software both on unit and windows version * reconnected power and tubing and everything looks good to me. * removed fores flo...")
- Replaced Tower LI7200 and updated calibration & software both on unit and windows version
- reconnected power and tubing and everything looks good to me.
- removed fores floor LI7200
- removed forest floor CNR4
- added newly calibrated CNR4 to forest floor tripod
- sent new program with updated calibration coefficients for this CNR4 to the data logger
- left forest floor li7200 wires in place but covered with a bag
- for tools needed:
- phillips screwdriver
- campbell phillips screwdriver
- campbell flat screwdriver
- crescent wrench
- pocket scissors
- electrical tape
- left the vertical stud for the li7200 installed.
- the machine screws for it are in the shed on the forest floor toughbook
- brought back to town the air intake for this to keep it out of the weather.
- The tower wifi antenna needs replacing. Do this next visit. The coax is weathered and fraying.
- all met sensors look good.
