SS Site Visit 2017-12-15

• Replaced Tower LI7200 and updated calibration & software both on unit and windows version
• reconnected power and tubing and everything looks good to me.
• removed fores floor LI7200
• removed forest floor CNR4
• added newly calibrated CNR4 to forest floor tripod
• sent new program with updated calibration coefficients for this CNR4 to the data logger
• left forest floor li7200 wires in place but covered with a bag
• for tools needed:
  • phillips screwdriver
  • campbell phillips screwdriver
  • campbell flat screwdriver
  • crescent wrench
  • pocket scissors
  • electrical tape
• left the vertical stud for the li7200 installed.
  • the machine screws for it are in the shed on the forest floor toughbook
  • brought back to town the air intake for this to keep it out of the weather.
• The tower wifi antenna needs replacing. Do this next visit. The coax is weathered and fraying.
• all met sensors look good.
• cleared snow off all sky cam