June 2008 Field Trip - Emily and Ken

From IARC 207 Wiki
Jump to navigation Jump to search

All sites need HMP45C replacement and send back old for recalibration.

Ken add stations that need conduit and bear fencing.


Note: Sites are grouped by area.

Day 1 West of Dalton Highway (White Hills)

1. DFM2 White Hills met Bear Damage:

  • Need anemometer cable,
  • solar panel,
  • soil profile (?),
  • electric fencing checked,
  • Measure distance from ground to snow sensor
  • Swap HMP45C

2. DFM4 NW Kuparuk Met DFM4:

  • Measure distance from ground to snow sensor
  • Swap HMP45C

3. DFM3 North White Hills Met

  • Check precip data and check precip gage. Only 2 tips so far this summer.
  • Swap HMP45C

4. DFM1 South White Hills Met (if time)

  • Swap HMP45C

Day 2 and 3 (Bullen Area)

5. DFR3 repeater Troubleshoot:

  • Lost communications with site
  • Needs HMP45C
  • Swap HMP45C

6. DBM7 Kadleroshilik Met DBM7 Snow Sensor:

  • Needs SR50 replacement.
  • Measure distance from ground to snow sensor.
  • Swap HMP45C

7. DBM8 Bullen Met DBM8 (If Time)

  • Replace GWS YSIx3 Air temp sensor
  • Swap HMP45C

Day 4 (Kavik Area)

8. DBR4 repeater Troubleshoot:

  • Lost communications with site
  • Swap HMP45C

9. DBM5 Upper Kad Met DBM5:

  • Check wiring of soil sensors, take photo.
  • Measure distance from ground to snow sensor.
  • Swap HMP45C
  • change out YSIx3 if time

10. DBM6 Kavik Met:

  • Check soil temperature wiring for any loose wires (temp sensors at 135 and 150 and 0 depth give funky readings),
  • Measure distance from ground to snow sensor,
  • reset antennae radio guy wires.
  • Swap HMP45C

Day 5 (Mountain Sites)

11. DBM3 Juniper Met DBM3

  • North fence needs another post,
  • solar panel wires are exposed, needs "plates" or other protection
  • Swap HMP45C

12. DBM1 Accomplishment Cr Met DBM1 (if time)

  • Swap HMP45C

13. DBM2 Ribdon Cr Met DBM2 (if time)

  • Swap HMP45C