Sept 2008 Field Trip - Emily and Ken

Ken add stations that need conduit and bear fencing.

Note: Sites are grouped by area.

Day 1 & 2 West of Dalton Highway (White Hills Area)

1. West Kuparuk met:

• Troubleshoot station

2. DFM4 NW Kuparuk Met DFM4:

• Add Electric Fence
• Add bark chips
• Measure distance from ground to snow sensor
• Take photos of site and snow sensor area

3. DFM2 White Hills met Bear Damage:

• Add bark chips
• Measure distance from ground to snow sensor
• Take photos of site and snow sensor area

4. DFM3 North White Hills Met

• Add bark chips
• Measure distance from ground to snow sensor
• Take photos of site and snow sensor area

5. DFM1 South White Hills Met (if time)

• Add bark chips
• Measure distance from ground to snow sensor
• Take photos of site and snow sensor area

Day 3 and 4 (Bullen Area/Kavik Area)

6. DBM7 Kadleroshilik Met DBM7 Snow Sensor:

• Check net radiometer - readings went bad after we left the site
• Add bark chips
• Measure distance from ground to snow sensor
• Take photos of site and snow sensor area

7. DBM8 Bullen Met DBM8

• Add bark chips
• Measure distance from ground to snow sensor
• Take photos of site and snow sensor area

9. DBM5 Upper Kad Met DBM5:

• Add bark chips
• Measure distance from ground to snow sensor
• Take photos of site and snow sensor area
• Add E-Fence???

10. DBM6 Kavik Met:

• Add bark chips
• Measure distance from ground to snow sensor
• Take photos of site and snow sensor area

Day 5 & 6 (Mountain Sites)

11. DBM3 Juniper Met DBM3

• North fence needs another post,
• solar panel wires are exposed, needs "plates" or other protection
• install conduit
• Swap HMP45C
• Add bark chips
• Measure distance from ground to snow sensor
• Take photos of site and snow sensor area

12. DBM1 Accomplishment Cr Met DBM1 (if time)

• Swap HMP45C
• install conduit if time permits
• install solar panel plate (larger size)
• Add bark chips
• Measure distance from ground to snow sensor
• Take photos of site and snow sensor area

13. DBM2 Ribdon Cr Met DBM2 (if time)

• Swap HMP45C
• install conduit
• Add bark chips
• Measure distance from ground to snow sensor
• Take photos of site and snow sensor area