SS Naoki Site visit 2023-05-19 Early Summer Site Maintenance

From IARC 207 Wiki
Jump to navigation Jump to search

Tasks Completed

  • re-starting the SmartFlux (SF) 2:
  • Tower wire tension check
  • Checked the condition of the tower base/legs
  • Level adjustment of CNR4 on forest floor, GEONOR, and tipping bucket rain gauge

Work memo:

SF2 Upon arrival, the IP address of SF2 was already displayed on the PC screen.

Pressing the "Connect" button on the SF software seems to establish a connection, but the SF status shows "Issue Detected: Review System Diagnosis." When checking the details of the problem, it states "Anemometer Disconnected," indicating that the anemometer is not connected. Even after restarting the PC, the same result persists.

When SF2 was installed previously, I connected the wiring accordingly so further trouble shooting is needed.


Photo Link https://drive.google.com/drive/folders/1RIdaKK_Uveq2J1mgV-2_Y36hwzwDoR4N